Your name *

Company name

Telephone

Email *

Leave a message here *

CONTACT

Meet the R26C1 4G CAT1 Industrial Router

 

I:

Support AUTO and customized APN settings to work with different

ISP SIM card.

II:

Dedicated hardware and software watchdog are designed to

support system running reliable.

III:

VPN Firewall offers connectivity, security and remote access

to both local and remote clients.

IV:

Full support for IPV4 and IPV6 network technology.

V:

Detects a network problem and redial automatically , ensuring

the customer’s SLAs are upheld.

VI:

Free service to monitor, configure and control all terminals via Cloud.

VII:

Offers Python programmable embedded environment for secondary

development

VIII:

9-36V DC power supply, Low-voltage, over current, over voltage,

anti-reverse protection

IX:

IEEE 802.11b/g/n WIFI, Access Point (AP), Up to 30 simultaneous

connections

  • MOBILE

    Mobile module

    4G (LTE) – Cat 1 up to 10 Mbps downlink, 5Mbps uplink

    Status

    Signal strength (RSSI), Attached network, IMSI, ICCID

    APN

    Auto APN, Customized APN

    WIRELESS

    Wireless mode

    IEEE 802.11b/g/n, Access Point (AP)

    WiFi security

    WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

    SSID

    SSID stealth mode and access control based on MAC address

    WiFi users

    Up to 30 simultaneous connections

    PHYSICAL INTERFACE

    WAN

    1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

    LAN

    1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

    Serial

    1 x RS232/RS485 DB9 port (2-Tx, 3-Rx, 5-GND)

    SIM

    1 Standard SIM card slot,1.8 V/3 V, external SIM holder

    Antenna

    2 x SMA for LTE, 1 x SMA for WiFi antenna connectors

    LED

    1 x Connection, 3 x Signal strength, 2 x Ethernet, 1 x Power, 1 x SIM, 1 x VPN, 1 x System

    Reset

    Reboot / Factory reset button

    NETWORK

    Routing

    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)

    Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP

    Connection monitoring

    Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

    Firewall

    Port forwarding

    DHCP

    Static and dynamic IP allocation, DHCP Relay

    QoS

    Traffic priority queuing by source/destination, service, protocol or port

    DDNS

    Supported >25 service providers, others can be configured manually

    Network backup

    VRRP, Mobile and Wired, each of which can be used as backup, using automatic failover

    SECURITY

    Attack prevention

    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention)

    VLAN

    Port and tag based VLAN separation

    WEB filter

    Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

    Access control

    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

    VPN

    OpenVPN

    Multiple clients can be running simultaneously, 10 encryption methods

    OpenVPN Encryption

    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

    IPsec

    IKEv1, IKEv2, supports up to 10 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

    GRE

    GRE tunnel

    PPTP, L2TP

    Client/Server services can run simultaneously

    Serial transmission

    TCP/UDP server

    Parameters

    Port, Baud rate, Parity, Data bits, Stop bits, Flow control

    TCP/UDP client

    Parameters

    Port, Baud rate, Parity, Data bits, Stop bits, Flow control, Heartbeat

    Data center

    Supported 4 server run simultaneously

    MONITORING & MANAGEMENT

    WEB UI

    HTTP, status, configuration, FW update,troubleshoot, event log, system log, kernel log

    FOTA

    Firmware update from sever, automatic notification

    SNMP

    SNMP (v1, v2, v3)

    IoT PLATFORMS

    Cloud of Things

    Allows monitoring Network info, Availability

    Configure

    Configure parameters, Update firmware

    SYSTEM CHARACTERISTICS

    CPU

    Mediatek MIPS 24Kc 580 MHz

    RAM

    64 MB, DDR2

    FLASH storage

    16 MB, SPI Flash

    FIRMWARE / CONFIGURATION

    WEB UI

    Update FW from file, check FW on cloud, configuration backup and restore

    FOTA

    Update FW/configuration from cloud platform

    RMS

    Update FW/configuration for multiple devices

    Keep settings

    Update FW without losing current configuration

    POWER

    Connector

    1 industrial DC power socket

    Input voltage range

    9 – 36 VDC, reverse polarity protection, surge protection

    Power consumption

    < 5 W Max

    PHYSICAL SPECIFICATION

    Casing material

    Metal housing. DIN rail mounting option

    Dimensions (W x H x D)

    165 x 116 x 24 mm

    Weight

    280 g

    OPERATING ENVIRONMENT

    Operating temperature

    -40 °C to 75 °C

    Operating humidity

    10% to 90% non-condensing

    Ingress Protection Rating

    IP30

    REGULATORY & TYPE APPROVALS

    Regulatory

    CE, FCC, CCC

    EMI IMMUNITY

    Standards

    Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
    FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)

    ESD

    EN61000-4-2:2009

    RS

    EN 61000-4-3:2006 + A1:2008 + A2:2010

    EFT

    EN 61000-4-4:2012

    Surge immunity (AC Power Line)

    EN 61000-4-5:2006

    Surge immunity (Ethernet ports)

    EN 61000-4-5:2014, clause 7.1 of ITU-T K21

    CS

    EN 61000-4-6:2009

    DIP

    EN 61000-4-11:2004

    RF

    Standards

    EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
    FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
    RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
    AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017

  •  

    Please choose the suitable model for your project.

    Model 

    Region

    LTE CAT4 (-C4)

    LTE CAT1 (-C1)

    R26A

     

    AT&T/ Verizon/ T-mobile, Canada

    LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71;

    WCDMA: B2/B4/B5

    No

    R26E

    EMEA/Korea/Thailand/India

    LTE-FDD: B1/B3/B7/B8/B20/B28A

    LTE-TDD: B38/B40/B41;

    WCDMA: B1/B8 ;

    GSM: B3/B8

    LTE-FDD: B1/B3/B5/B7/B8/B20

    WCDMA: B1/B5/B8;

    GSM: B3/B8

     

    R26AU

    Latin America/ANZ, Australia

     

    LTE-FDD: B1/B2 /B3/B4/B5/B7/B8/B28;

    LTE-TDD: B40

    WCDMA: B1/B2/B5/B8;

    GSM: B2/B3/B5/B8

    LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE-FDD: B40

    WCDMA: B1/B2/B5/B8;

    GSM: B2/B3/B5/B8

    R26J

    Japan

    LTE-FDD: B1/B3/B8/B18/B19/B26;

    LTE-TDD: B41;

    WCDMA: B1/B6/B8/B19

    No

    R26G

    Global

    LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/ B19/B20/B25/B26/B28

    LTE TDD: B38/B39/B40/B41

    WCDMA: B1/B2/B4/B5/B6/B8/B19

    GSM: B2/B3/B5/B8

    No

    Standard Package Includes:

    * 1x R26 4G Industrial Router

    * 1x 12W PSU

    * 1x Ethernet cable, 1m

    * 2x LTE magnet antenna,1.5m cable

    * 1x WiFi antenna

    Note: All accessories can be customized.

RELATED PRODUCTS