Meet the R28 4G LTE Cellular Router
I: |
Support AUTO and customized APN settings to work with different ISP SIM card. |
II: |
Dedicated hardware and software watchdog are designed to support system running reliable. |
III: |
VPN Firewall offers connectivity, security and remote access to both local and remote clients. |
IV: |
Full support for IPV4 and IPV6 network technology. |
V: |
Detects a network problem and redial automatically , ensuring the customer’s SLAs are upheld. |
VI: |
Free service to monitor, configure and control all terminals via Cloud. |
VII: |
Offers Python programmable embedded environment for secondary development |
VIII: |
7-36V DC power supply, Low-voltage, over current, over voltage, anti-reverse protection |
IX: |
IEEE 802.11b/g/n WIFI, Access Point (AP), Up to 30 simultaneous connections |
-
MOBILE
Mobile module
4G (LTE) – Cat 4 up to 150 Mbps downlink, 50Mbps uplink
Status
Signal strength (RSSI), Attached network, IMSI, ICCID
APN
Auto APN, Customized APN
WIRELESS
Wireless mode
IEEE 802.11b/g/n, Access Point (AP)
WiFi security
WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID
SSID stealth mode and access control based on MAC address
WiFi users
Up to 30 simultaneous connections
PHYSICAL INTERFACE
WAN
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Serial
1 x RS232/RS485 DB9 port (2-Tx, 3-Rx, 5-GND)
SIM
1 Standard SIM card slot,1.8 V/3 V, external SIM holder
Antenna
1 x SMA for LTE, 2 x SMA for WiFi antenna connectors
LED
1 x Connection, 1 x Signal strength, 2 x Ethernet, 1 x Power, 1 x VPN, 1 x WiFi
Reset
Reboot / Factory reset button
NETWORK
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP
Connection monitoring
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forwarding
DHCP
Static and dynamic IP allocation, DHCP Relay
QoS
Traffic priority queuing by source/destination, service, protocol or port
DDNS
Supported >25 service providers, others can be configured manually
Network backup
VRRP, Mobile and Wired, each of which can be used as backup, using automatic failover
SECURITY
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention)
VLAN
Port and tag based VLAN separation
WEB filter
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN
Multiple clients can be running simultaneously, 10 encryption methods
OpenVPN Encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec
IKEv1, IKEv2, supports up to 10 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE
GRE tunnel
PPTP, L2TP
Client/Server services can run simultaneously
Serial transmission
TCP/UDP server
Parameters
Port, Baud rate, Parity, Data bits, Stop bits, Flow control
TCP/UDP client
Parameters
Port, Baud rate, Parity, Data bits, Stop bits, Flow control, Heartbeat
Data center
Supported 4 server run simultaneously
MONITORING & MANAGEMENT
WEB UI
HTTP, status, configuration, FW update,troubleshoot, event log, system log, kernel log
FOTA
Firmware update from sever, automatic notification
SNMP
SNMP (v1, v2, v3)
IoT PLATFORMS
Cloud of Things
Allows monitoring Network info, Availability
Configure
Configure parameters, Update firmware
SYSTEM CHARACTERISTICS
CPU
Mediatek MIPS 24Kc 580 MHz
RAM
128 MB, DDR2
FLASH storage
16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI
Update FW from file, check FW on cloud, configuration backup and restore
FOTA
Update FW/configuration from cloud platform
RMS
Update FW/configuration for multiple devices
Keep settings
Update FW without losing current configuration
POWER
Connector
1 industrial DC power socket
Input voltage range
7 – 36 VDC, reverse polarity protection, surge protection
Power consumption
< 5 W Max
PHYSICAL SPECIFICATION
Casing material
Metal housing
Dimensions (W x H x D)
65 x 94 x 24 mm
Weight
280 g
OPERATING ENVIRONMENT
Operating temperature
-40 °C to 75 °C
Operating humidity
10% to 90% non-condensing
Ingress Protection Rating
IP30
REGULATORY & TYPE APPROVALS
Regulatory
CE, FCC, CCC
EMI IMMUNITY
Standards
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)ESD
EN61000-4-2:2009
RS
EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT
EN 61000-4-4:2012
Surge immunity (AC Power Line)
EN 61000-4-5:2006
Surge immunity (Ethernet ports)
EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS
EN 61000-4-6:2009
DIP
EN 61000-4-11:2004
RF
Standards
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 -
Please choose the suitable model for your project.
Model
Region
LTE CAT4
R28A
AT&T/ Verizon/ T-mobile, Canada
LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71;
WCDMA: B2/B4/B5
R28E
EMEA/Korea/Thailand/India
LTE-FDD: B1/B3/B7/B8/B20/B28A
LTE-TDD: B38/B40/B41;
WCDMA: B1/B8 ;
GSM: B3/B8
R28AU
Latin America/ANZ, Australia
LTE-FDD: B1/B2 /B3/B4/B5/B7/B8/B28;
LTE-TDD: B40
WCDMA: B1/B2/B5/B8;
GSM: B2/B3/B5/B8
R28J
Japan
LTE-FDD: B1/B3/B8/B18/B19/B26;
LTE-TDD: B41;
WCDMA: B1/B6/B8/B19
R28G
Global
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/ B19/B20/B25/B26/B28
LTE TDD: B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B6/B8/B19
GSM: B2/B3/B5/B8
Standard Package Includes:
* 1x R58 4G Industrial Router
* 1x 12W PSU
* 1x Ethernet cable, 1m
* 1x LTE magnet antenna,1.5m cable
* 2x WiFi antenna
Note: All accessories can be customized.
RELATED PRODUCTS