ꁲ
Your name *

Company name

Telephone

Email *

Leave a message here *

CONTACT
ꁆ ꁇ

Meet the R500 LTE-A 4G Industrial Router

 

I：

Support AUTO and customized APN settings to work with different

ISP SIM card.

II：

Dedicated hardware and software watchdog are designed to

support system running reliable.

III：

VPN Firewall offers connectivity, security and remote access

to both local and remote clients.

IV：

Full support for IPV4 and IPV6 network technology.

V：

Detects a network problem and switch to the standby SIM, ensuring

the customer’s SLAs are upheld.

VI：

Free service to monitor, configure and control all terminals via Cloud.

VII：

Offers Python programmable embedded environment for secondary

development

VIII：

12-36V DC power supply, Low-voltage, over current, over voltage,

anti-reverse protection

IX：

IEEE 802.11ax WIFI6, Access Point (AP), Up to 100 simultaneous

connections

  • The R500 LTE-A router uses MTK7981B ARM Cortex-A53 MPCore, and adopts 802.11ax WIFI6 standard, data transfer rate can be up to 3000Mbps. It's integrated with industrial Cat12 modem based on Qualcomm chipset, compatible with 4G LTE-A Cat6, Cat4 networks, to ensure the router works well.

     

    Via GPS module soldered to the router motherboard, R500 can report the location information in NEMA-0183 formats to YHioT cloud management platform or the user-defined TCP/UDP server for location and tracking. It adopts software and hardware dual watchdog design,automatically reconnects when the networks was disconnected to ensure that the device is always online. It's also a VPN router, and supports multiple VPN protocols, such as OpenVPN, IPSec, GRE, PPTP and L2TP.  Via YHioT Cloud, customers can monitor, configure and control all the routers for free. 

     

    We also offers OEM and ODM services, looking forward to the cooperations with you.

     

    MOBILE

    Mobile module

    4G (LTE-A) – Cat 6 up to 300 Mbps downlink, 50Mbps uplink

    4G (LTE-A) – Cat 12 up to 600 Mbps downlink, 150Mbps uplink

    Status

    Signal strength (RSSI), Attached network, IMSI, ICCID

    APN

    Auto APN, Customized APN

    WIRELESS

    Wireless mode

    IEEE 802.11ax, Access Point (AP)

    WiFi security

    WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

    SSID

    SSID stealth mode and access control based on MAC address

    WiFi users

    Up to 100 simultaneous connections

    PHYSICAL INTERFACE

    WAN

    1 x WAN port (can be configured to LAN) 1000/100 Mbps

    LAN

    1 x LAN port, 1000/100 Mbps

    Serial

    1 x RS232/RS485 DB9 port (2-Tx, 3-Rx, 5-GND)

    SIM

    1 Standard SIM card slot,1.8 V/3 V, external SIM holder

    Antenna

    2 x SMA for LTE, 2 x SMA for WiFi antenna connectors

    LED

    PWR / WAN / LAN / 2.4GHz / 5.8GHz / Data / Cellular / Signal

    Reset

    Reboot / Factory reset button

    NETWORK

    Routing

    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)

    Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP

    Connection monitoring

    Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

    Firewall

    Port forwarding

    DHCP

    Static and dynamic IP allocation, DHCP Relay

    QoS

    Traffic priority queuing by source/destination, service, protocol or port

    DDNS

    Supported >25 service providers, others can be configured manually

    Network backup

    VRRP, Mobile and Wired, each of which can be used as backup, using automatic failover

    SECURITY

    Attack prevention

    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention)

    VLAN

    Port and tag based VLAN separation

    WEB filter

    Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

    Access control

    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

    VPN

    OpenVPN

    Multiple clients can be running simultaneously, 10 encryption methods

    OpenVPN Encryption

    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

    IPsec

    IKEv1, IKEv2, supports up to 10 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

    GRE

    GRE tunnel

    PPTP, L2TP

    Client/Server services can run simultaneously

    Serial transmission

    TCP/UDP server

    Parameters

    Port, Baud rate, Parity, Data bits, Stop bits, Flow control

    TCP/UDP client

    Parameters

    Port, Baud rate, Parity, Data bits, Stop bits, Flow control, Heartbeat

    Data center

    Supported 4 server run simultaneously

    MONITORING & MANAGEMENT

    WEB UI

    HTTP, status, configuration, FW update,troubleshoot, event log, system log, kernel log

    FOTA

    Firmware update from sever, automatic notification

    SNMP

    SNMP (v1, v2, v3)

    IoT PLATFORMS

    Cloud of Things

    Allows monitoring Network info, Availability

    Configure

    Configure parameters, Update firmware

    SYSTEM CHARACTERISTICS

    CPU

    MTK MT7981BA+MT7976CN+MT7531AE

    RAM

    256 MB, DDR3L

    FLASH storage

    32 MB, SPI Flash

    FIRMWARE / CONFIGURATION

    WEB UI

    Update FW from file, check FW on cloud, configuration backup and restore

    FOTA

    Update FW/configuration from cloud platform

    RMS

    Update FW/configuration for multiple devices

    Keep settings

    Update FW without losing current configuration

    POWER

    Connector

    1 industrial DC power socket, POE power supply

    Input voltage range

    12 – 36 VDC, reverse polarity protection, surge protection

    Power consumption

    < 9 W Max

    PHYSICAL SPECIFICATION

    Casing material

    Metal housing

    Dimensions (W x H x D)

    150 x 115 x 40 mm

    Weight

    460 g

    OPERATING ENVIRONMENT

    Operating temperature

    -40 °C to 75 °C

    Operating humidity

    10% to 90% non-condensing

    Ingress Protection Rating

    IP30

    REGULATORY & TYPE APPROVALS

    Regulatory

    CE, FCC, CCC

    EMI IMMUNITY

    Standards

    Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
    FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)

    ESD

    EN61000-4-2:2009

    RS

    EN 61000-4-3:2006 + A1:2008 + A2:2010

    EFT

    EN 61000-4-4:2012

    Surge immunity (AC Power Line)

    EN 61000-4-5:2006

    Surge immunity (Ethernet ports)

    EN 61000-4-5:2014, clause 7.1 of ITU-T K21

    CS

    EN 61000-4-6:2009

    DIP

    EN 61000-4-11:2004

    RF

    Standards

    EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
    FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
    RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
    AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017

  •  

    Please choose the suitable model for your project.

    Model 

    Region

    LTE CAT4 

    R500A

     

    America

    LTE-FDD: B2/B4/B5/B7/B12/B13/B14/B25/B26/B29/B30/B66/B71;

    WCDMA: B2/B4/B5

    R500E

    EMEA, Australia,Brazil

     

    LTE-FDD: B1/B3/B4/B5/B7/B8/B28/B32;

    LTE-TDD: B40

    WCDMA: B1/B2/B5/B8;

    GSM: B2/B3/B5/B8

    R500J

    Japan

    LTE-FDD: B1/B3/B5/B8/B18/B19/B28;

    LTE-TDD: B41;

    WCDMA: B1/B6/B8/B19

    Standard Package Includes:

    * 1x R500 4G LTE-A Router

    * 1x 24W PSU

    * 1x Ethernet cable, 1m

    * 2x LTE magnet antenna,1.5m cable

    * 2x WiFi antenna

    Note: All accessories can be customized.

RELATED PRODUCTS